B&R Servo motor 8M series
1) The B&R motor cables with this cable cross section are produced optimally (stripping length) for the recommended ACOPOS servo drives (see next line).
B&R motor cables with other cable cross sections can also be used (within the specified terminal cross section range) and can be obtained from B&R in the
desired design on request.
1.5 1.5 1.5 1.5 4
| Recommended ACOPOS Servo Drive 8Vxxxx.00-x 2) |
2) The recommended servo drive is defined for the stall current of the motor; if more than double the stall torque is required during the acceleration phase, the
next larger servo drive should be selected. This recommendation is only a guideline, detailed inspection of the corresponding speed - torque characteristic
curve can result in deviations of the servo drive size (one size larger or smaller).
The speed - torque characteristic curves shown in the following sections always refer to the smallest recommended servo drive for the motor length!
8MSA4M.R0-B5
